FEATURES
- Regulated output voltage and frequency for smooth and quite operation of AC motors and other inductive and capacitive loads Surge capability load up to 300%
- Smart LCD panel display for battery voltage and load percentage
- Protections like over temperature, short circuit, battery low/high cut, overload
- Low maintenance cost
- State of art IGBT based PWM technology to increase Crest Factor Tolerance & Dynamic Stability.
- High Inrush capability to handle Lift during Startup
- Very Low Total Harmonic Distortion <3%.
- All necessary Protection like Short Circuit, Over Temp., Battery Low/High, Mains MCB Tripped etc. with Comprehensive display.
- 100% Pure, Reliable and Regulated Power
- Unbalanced Load Handling Capability
- Runs heavy duty appliances / equipments.
- Extended overload capability (upto 300%
- Start up without Mains (Cold start)
- Generator compatible
- Extended power backup time
- Built in Galvanic Isolation Transformer
APPLICATIONS
- Industrial drives and motors
- Petrol pumps
- BPO / Call centers
- Deep freezers
- Elevators & Escalators
- Laboratories
- Textile Industry
- Restaurants and Hotels
- Clubs/Pubs
- Welding arcs
SPECIFICATION
| Type | 3 Phase Input - 3 Phase Output |
| Series | POWER SERIES |
| Capacity | 5 KVA TO 50 KVA |
| INPUT | |
|---|---|
| No. of Phases | 3 Phase-4 Wire |
| Voltage Range | 310 V - 480 Volts AC |
| Input Frequency Range | 45 to 55 Hz. |
| OUTPUT | |
| Load PF Range | 0.8 lagging |
| Phase | 3 Phase-4 Wire |
| Output Waveform | Pure Sine Wave |
| Voltage | 400 V + 2 % |
| Frequency | 50Hz + 0.1% |
| Load Crest Factor | > 4:1 |
| Output Voltage THD | <=3% on Linear Load |
| Over Load Capacity | 110% for 2 Minutes |
| Transient Recovery | ± 4% under full load change and corrected within 5 cycles |
| Phase Displacement | 120° ± 1° |
| Over Load Capacity | 105% continuos, 300% for 60 sec |
| BY PASS | |
| Maintenance By Pass | Available |
| BATTERIES | |
| No. of 12V Batteries | 15 up to 15 kva - 30 from 20 to 50 kva |
| Voltage | 180 VDC - 360 VDC |
| Battery Charging current | 1 Amp to 10 Amp |
| Battery Recommendation | From 26 Ah to 200 Ah |
| GENERAL | |
| Indication | LCD panel & LED |
| Protection | Output Overload & Short circuit, Output under & Overvoltage DC Under & Overvoltage, Single Phasing & Phase unbalance (for 3 -Ph Input only) |
| Cooling | Forced Air Cooling |
| Inverter Efficiency | 95% |
| Operating Temperature | O'C to 50'C |
| Operating Humidity | Max 95%, Non-condensing |
| Accoustic Noise | Less than 55 dB at 1 Meter |